Random
Source Code
Random
A game made by Dani that is still in deplovment
Dani:Oh so you don’t know what Carlson (3D) is?
3d gunner youtube
Gorilla glue and sawdust can be used to create a molded part that is strong and durable. Here is how you can make a molded part using Gorilla glue and sawdust:
Materials:
- Gorilla Glue
- Sawdust
- Mixing bowl
- Measuring cup
- Mixing spoon or spatula
- Mold or form
- Sandpaper
Instructions:
1. Mix the Gorilla Glue and sawdust together in a mixing bowl. Start with a ratio of 1:1, and adjust as needed to achieve the desired consistency. The mixture should be thick and moldable, but not too dry or too wet.
2. Press the mixture into the mold or form, making sure to pack it tightly and evenly. Smooth out the surface as much as possible.
3. Let the mixture dry for at least 24 hours, or until it is completely hardened.
4. Remove the molded part from the mold or form. If necessary, use a knife or other tool to carefully pry it loose.
5. Sand the surface of the molded part with sandpaper to remove any rough or uneven spots. You can also use sandpaper to shape and refine the part as needed.
6. Your molded part is now ready to use! It can be painted or finished as desired.
even substitue the sawdust for your drywall if ground with morter and pestol glue sticks work if mixed with alcohol.
Part 3
3d youtube firearm 3
The month where everything is supposed to be on 3D form especially magazines and newspapers! It’s wicked
Mum: the colours in this magazine are ALL wrong
Me: Hahhah no Mum you retard. You have to wear 3D glasses because it’s July 3D
Ammunition for 3d youtube firearm 1,2,3
Materials:
- Heavy paper (such as cardstock or construction paper)
- Scissors
- Ruler
- Pen or pencil
- Glue or tape
- Shotshell crimping tool (optional)
Instructions:
1. Cut a rectangular piece of heavy paper that is approximately 4 inches long and 2 inches wide. This will be the body of the shell.
2. Fold the paper in half lengthwise, creasing it firmly. This will create a center line down the length of the paper.
3. Open the paper back up and draw a line across the center line, approximately 1/2 inch from one end of the paper. This will mark where the base of the shotshell will be.
4. Draw a line lengthwise down the center of the paper, starting at the base line and ending about 1/2 inch from the opposite end of the paper.
5. Fold the paper in half again along the center line, pressing firmly to create a sharp crease.
6. Fold the bottom end of the paper up along the base line, creating a bottom flap that is approximately 1/2 inch long.
7. Apply glue or tape to the top edge of the bottom flap, and press the two sides of the paper together to form a tube. Hold the paper in place until the glue or tape dries.
8. Fill the tube with the desired amount of shot.
9. Cut a circular piece of paper that is slightly larger in diameter than the open end of the tube. This will be the top wad.
10. Place the top wad over the open end of the tube, and press it down firmly to create a seal.
Part 5
3d youtube firearm 5
Team 3D was a legendary tag team formed in the Attitude Era when wrestling was becoming popular around the world. Mostly known for their hardcore and table spots. Also known for their feuds with Edge and Christian and The Hardy Boyz and known for their storyline with Trish Stratus. Members:Devon Dudley and Bubba Ray Dudley. also a lesser known member and known as a crazy little man.... Spike Dudley!
Devon... Get the tables!
Put'em through a table!
BY GAWD TEAM 3D PUT HIM THROUGH A TABLE.
3D!
person 1: wanna play minecraft?
person 2: nah I only have block craft 3d
person 1: oh okay.. why is my name person 1???
please unban me from the discord server
Henry Stickmin 3D RP Discord Server